| Metroform - Horizon : Camshaft Crankshaft Metrology Systems |
| |
Calibration unit for Precision measuring scales, rules and measuring tapes.
|
| • | Precision flat granite bed for high degree of Thermal of structural stability. | | Technical Specifications | | Part length | 500 mm | | Swing diameter | 125 mm | | Follower stroke | 50 mm | | Part weight | 40 kg | Spindle rpm
(Programmable) | 5 - 20 rpm | | Radial Resolution | 0.1 um | | Angular Resolution | 0.1 deg | Machine Dimensions
: Height |
350 mm | | Width | 375 mm | | Length | 1300 mm | | Weight | 250 kg | (Design / Specifications subjects to
change without notice) | |
| • | Durable carbide followers (flat and disc) as well as head/tail stok centers. |
| • | High resulution glass encoder system for both rotary and radial azis facilitate to have highest precise measurement date. |
| • | Automatic computerised data acquisition system for complete 360° rotation of the shaft allows fast cycle time with zero manual errors. |
| • | Only one size measuring probe needed, regardless of engine follower size. |
| • | Complete lobe measurement, graphical display and analysis of: lift, velocity, acceleration, jerk (3°derivate), radius of curvature, pressure angle. |
| • | Lobe data corrected to zero base circle runout. |
| • | Angular position istings for all lobe tip angles. |
| • | Compare measured data and design lift data profiles in graphic and numeric modes. |
| • | Graphic displays for all motions curves. |
| • | Printed reports of screen graphics and tabular data. |
| • | Compare base circle radius, run-out and lobe tip angles to design data showing tolerance limits. |
| • | Inch or metric data input and output. |
| |
| CAMSHAFT MEASURING PARAMETERS | | • Roundness (LSC, MZC) | • Surface Chatter | • Lift / Lift Error | • Index Angle to Reference(s) | | • Cylindricity | • Taper | • Center Deviation | • Base Circle Radius | | • Diameter | • Eccentricity | • Velocity | • Lobing. | | • Radius | • Runout ( radial) | • Acceleration | • Jurk | | • Radius of Curvature | • Pressure Angle | | | | (Design / Specifications subjects to change without notice) | |
| |
